Smart Update Manager (SUM) operates without the need for agents or other permanently installed software on the target nodes. Baseline functionality including validation, assigning baselines in guided update, dynamic filtering, filtering by server model and the ability to download baselines from http server. If the text is Green, then this component is new to the Smart Update Firmware DVD since the previous version. HP SUM (HP Smart Update Manager) support column key. Component can be deployed by the HP Smart Update Manager under the hosted operating system (i.e. Windows component on Windows server).
HP Smart Update Tools for Windows x64
By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
Type:
Application - System Management
Version:
1.0.0.0(26 Oct 2015)
Operating System(s):
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows HPC Server 2008 R2
File name:
cp023942.exe (20 MB)
HP Smart Update Tools (HP SUT) is an application which enables firmware and software deployment via the iLO management network using the server’s local administrator credentials. HP SUT can run as a service when working with HP OneView managed servers or in an On Demand mode. HP SUT requires a Service Pack for ProLiant-based ISO containing HP Smart Update Manager version 7.4.0 or later, iLO 4 firmware version 2.30 or later, and an iLO Advanced Pack license for deployment.
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release of HP Smart Update Tools
Please see the HP SUT Release Notes for additional information.
Prerequisites:
For prerequisite information, please see the HP SUT Release Notes.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Download the Smart Component (cp023942.exe) file to a local directory on the server where you want to install the software.
Change to the directory.
Run the .exe file by double-clicking it. A dialog box will display.
Click the ‘Install’ button to install HP SUT.
End User License Agreements: Hewlett-Packard End User License Agreement
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Important:
Please note the following:
HP SUT requires a Service Pack for ProLiant-based ISO containing HP Smart Update Manager (HP SUM) 7.4.0 or later. If an earlier version of HP SUM is used, HP SUT will notify the user that HP SUM 7.4.0 and later is required.
HP SUT uses the HP RESTful Tool to communicate with iLO. HP RESTful Tool is included with the HP SUT component and is installed as part of the HP SUT installation process. If an earlier version of the HP RESTful Tool is already installed on a server, the HP RESTful Tool provided with HP SUT will be upgraded on the server and the older version will not be removed.
HP SUT will only service HP ProLiant Gen8 servers and later..
HP SUT requires iLO 4 (Integrated Lights-Out) firmware version 2.30 or later to be installed on the server running HP SUT and iLO Advanced Pack license. When using HP SUT in conjunction with HP OneView, you can use iLO 4 firmware version 2.31 or later without the iLO Advanced Pack license.
Please note the following:
HP SUT requires a Service Pack for ProLiant-based ISO containing HP Smart Update Manager (HP SUM) 7.4.0 or later. If an earlier version of HP SUM is used, HP SUT will notify the user that HP SUM 7.4.0 and later is required.
HP SUT uses the HP RESTful Tool to communicate with iLO. HP RESTful Tool is included with the HP SUT component and is installed as part of the HP SUT installation process. If an earlier version of the HP RESTful Tool is already installed on a server, the HP RESTful Tool provided with HP SUT will be upgraded on the server and the older version will not be removed.
HP SUT will only service HP ProLiant Gen8 servers and later..
HP SUT requires iLO 4 (Integrated Lights-Out) firmware version 2.30 or later to be installed on the server running HP SUT and iLO Advanced Pack license. When using HP SUT in conjunction with HP OneView, you can use iLO 4 firmware version 2.31 or later without the iLO Advanced Pack license.
Version:2.5.0.0 (20 Dec 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.4.5.0 (7 Dec 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.4.0.0 (2 Apr 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.3.6.0 (29 Nov 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.3.0.0 (26 Jun 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.2.1.0 (3 May 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
SUT status shows Install failed though the update is successful.
SUT self-upgrade from 2.0.1 to 2.2.1 did not work.
Version:2.2.0.0 (5 Feb 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the enhancements in this release
Version:2.1.0.0 (22 Dec 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the enhancements in this release.
See the iSUT Release Notes for information about the enhancements in this release.
Version:2.0.1.0 (25 Sep 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online update from iLO Amplifier Pack failed due to SUM deployment failure
SUT settings not restored in OV post upgrade from 1.6.5 to 2.0.0
Version:2.0.0.0 (12 Jul 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
iSUT 2.0.0 and later is required on HPE ProLiant Gen 10 servers.
See the iSUT Release Notes for information about the issues resolved in this release.
See the iSUT Release Notes for information about the enhancements in this release.
Version:1.6.5.0 (24 Oct 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUT Release Notes for information about the issues resolved in this release.
Enhancements for HP SUT 1.6.5:
Added support for new HPE Synergy Gen9 Compute Modules, HPE ProLiant Gen9 servers, and options
Added support for Microsoft Windows Server 2016
Add signature checking prior to component deployment
Version:1.0.1.0 (21 Oct 2016)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixes for HP SUT 1.0.1:
Changed the default installation mode to On Demand
HP SUT Self Update does not fail on a TPM-enabled machine
Installation of CHIF driver does not cause ProLiant Gen9 servers to unexpectedly reboot
Version:1.0.0.0 (26 Oct 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release of HP Smart Update Tools
Please see the HP SUT Release Notes for additional information.
Type:
Application - System Management
Version:
1.0.0.0(26 Oct 2015)
Operating System(s):
Microsoft Windows HPC Server 2008 R2
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Description
HP Smart Update Tools (HP SUT) is an application which enables firmware and software deployment via the iLO management network using the server’s local administrator credentials. HP SUT can run as a service when working with HP OneView managed servers or in an On Demand mode. HP SUT requires a Service Pack for ProLiant-based ISO containing HP Smart Update Manager version 7.4.0 or later, iLO 4 firmware version 2.30 or later, and an iLO Advanced Pack license for deployment.
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release of HP Smart Update Tools
Please see the HP SUT Release Notes for additional information.
Installation Instructions
Prerequisites:
For prerequisite information, please see the HP SUT Release Notes.
To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Download the Smart Component (cp023942.exe) file to a local directory on the server where you want to install the software.
Change to the directory.
Run the .exe file by double-clicking it. A dialog box will display.
Click the ‘Install’ button to install HP SUT.
Release Notes
End User License Agreements: Hewlett-Packard End User License Agreement
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Important:
Please note the following:
HP SUT requires a Service Pack for ProLiant-based ISO containing HP Smart Update Manager (HP SUM) 7.4.0 or later. If an earlier version of HP SUM is used, HP SUT will notify the user that HP SUM 7.4.0 and later is required.
HP SUT uses the HP RESTful Tool to communicate with iLO. HP RESTful Tool is included with the HP SUT component and is installed as part of the HP SUT installation process. If an earlier version of the HP RESTful Tool is already installed on a server, the HP RESTful Tool provided with HP SUT will be upgraded on the server and the older version will not be removed.
HP SUT will only service HP ProLiant Gen8 servers and later..
HP SUT requires iLO 4 (Integrated Lights-Out) firmware version 2.30 or later to be installed on the server running HP SUT and iLO Advanced Pack license. When using HP SUT in conjunction with HP OneView, you can use iLO 4 firmware version 2.31 or later without the iLO Advanced Pack license.
Important
Please note the following:
HP SUT requires a Service Pack for ProLiant-based ISO containing HP Smart Update Manager (HP SUM) 7.4.0 or later. If an earlier version of HP SUM is used, HP SUT will notify the user that HP SUM 7.4.0 and later is required.
HP SUT uses the HP RESTful Tool to communicate with iLO. HP RESTful Tool is included with the HP SUT component and is installed as part of the HP SUT installation process. If an earlier version of the HP RESTful Tool is already installed on a server, the HP RESTful Tool provided with HP SUT will be upgraded on the server and the older version will not be removed.
HP SUT will only service HP ProLiant Gen8 servers and later..
HP SUT requires iLO 4 (Integrated Lights-Out) firmware version 2.30 or later to be installed on the server running HP SUT and iLO Advanced Pack license. When using HP SUT in conjunction with HP OneView, you can use iLO 4 firmware version 2.31 or later without the iLO Advanced Pack license.
Revision History
Version:2.5.0.0 (20 Dec 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.4.5.0 (7 Dec 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.4.0.0 (2 Apr 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.3.6.0 (29 Nov 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.3.0.0 (26 Jun 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the issues resolved in this release
Version:2.2.1.0 (3 May 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
SUT status shows Install failed though the update is successful.
SUT self-upgrade from 2.0.1 to 2.2.1 did not work.
Version:2.2.0.0 (5 Feb 2018)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the issues resolved in this release
See the iSUT Release Notes for information about the enhancements in this release
Version:2.1.0.0 (22 Dec 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the iSUT Release Notes for information about the enhancements in this release.
See the iSUT Release Notes for information about the enhancements in this release.
Version:2.0.1.0 (25 Sep 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online update from iLO Amplifier Pack failed due to SUM deployment failure
SUT settings not restored in OV post upgrade from 1.6.5 to 2.0.0
Version:2.0.0.0 (12 Jul 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
iSUT 2.0.0 and later is required on HPE ProLiant Gen 10 servers.
See the iSUT Release Notes for information about the issues resolved in this release.
See the iSUT Release Notes for information about the enhancements in this release.
Version:1.6.5.0 (24 Oct 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
See the HP SUT Release Notes for information about the issues resolved in this release.
Enhancements for HP SUT 1.6.5:
Added support for new HPE Synergy Gen9 Compute Modules, HPE ProLiant Gen9 servers, and options
Added support for Microsoft Windows Server 2016
Add signature checking prior to component deployment
Version:1.0.1.0 (21 Oct 2016)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Fixes for HP SUT 1.0.1:
Changed the default installation mode to On Demand
HP SUT Self Update does not fail on a TPM-enabled machine
Installation of CHIF driver does not cause ProLiant Gen9 servers to unexpectedly reboot
Version:1.0.0.0 (26 Oct 2015)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release of HP Smart Update Tools
Please see the HP SUT Release Notes for additional information.
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.
Printable version
* RECOMMENDED * Online ROM Flash Component for Windows (x64) - EG0900FDJYR and EG1200FDJYT Drives
By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
Type:
Firmware - SAS Storage Disk
Version:
HPD4(C)(24 Oct 2016)
Operating System(s):
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2008 R2
Multi-part download
File name:
cp029255.md5 (48 Bytes)
File name:
cp029255.exe (4.5 MB)
This x64 Smart Component provides firmware for the following drive models: EG0900FDJYR and EG1200FDJYT
Enhancements/New Features:
Added support for Microsoft Windows Server 2016.
To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:
Reboot Requirement: Reboot may be required after installation for updates to take effect and hardware stability to be maintained.
Installation:
To update firmware from Windows operating system on target server:
Place the Smart Component in a temporary directory.
Double-click on the Smart Component.
Follow the directions given by the Smart Component.
Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Place the desired firmware to be updated in the directory, <HPE SPP root folder>hpswpackages.
Run launch_hpsum.bat which is found in the root folder of the SPP.
End User License Agreements: HPE Software License Agreement v1 Hewlett-Packard End User License Agreement
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD4 do not need to update to HPD4 (C).
Notes:
Deliverable Name: Online ROM Flash Component for Windows (x64) - EG0900FDJYR and EG1200FDJYT Drives
Release Version and/or Date: HPD4 Last Recommended or Critical Version: HPD4
Previous Version of Firmware: HPD1 Firmware Dependency: None Enhancements/New Features:
Added support for Microsoft Windows Server 2016.
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
The component would fail to flash drive firmware on a server with a Trusted Platform Module (TPM) enabled when using the /tpmbypass switch.
Problems Fixed for HPD4 (C):
Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - “Device appears more than once in tree”. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.
Component would cause an exception error when deployed on a computer with a fully qualified domain name greater than 40 characters in length.
Known Issues: None
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD4 do not need to update to HPD4 (C).
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
The component would fail to flash drive firmware on a server with a Trusted Platform Module (TPM) enabled when using the /tpmbypass switch.
Problems Fixed for HPD4 (C):
Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - “Device appears more than once in tree”. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.
Component would cause an exception error when deployed on a computer with a fully qualified domain name greater than 40 characters in length.
Version:HPD4(C) (24 Oct 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD4 do not need to update to HPD4 (C).
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
The component would fail to flash drive firmware on a server with a Trusted Platform Module (TPM) enabled when using the /tpmbypass switch.
Problems Fixed for HPD4 (C):
Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - “Device appears more than once in tree”. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.
Component would cause an exception error when deployed on a computer with a fully qualified domain name greater than 40 characters in length.
Enhancements/New Features:
Added support for Microsoft Windows Server 2016.
Version:HPD4(B) (1 Apr 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD4 do not need to update to HPD4(B).
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
The component would fail to flash drive firmware on a server with a Trusted Platform Module (TPM) enabled when using the /tpmbypass switch.
Version:HPD4 (1 Apr 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HP Smart Array controller running in Zero Memory (ZM) mode or an HP ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Version:HPD1(B) (30 Mar 2015)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HP Smart Array controller running in Zero Memory (ZM) mode or an HP ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD1 do not need to update to HPD1 (B).
Problems Fixed:
This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset. When the drives are connected to a HP Smart Array E200 controller, the drive firmware must be updated to version HPD1 before the controller will detect the drives.
Enhancements/New Features:
Added support for UEFI (Universal Extensible Firmware Interface) based servers.
Enhancements/New Features for HPD1 (B):
Updated the flash engine to standardize logging across all SAS drive components.
Enhanced logging capability to improve the details provided in the component log file.
Version:HPD1 (9 Sep 2014)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HP Smart Array controller running in Zero Memory (ZM) mode or an HP ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux and Microsoft Windows environments. All other OSes would require an offline update using the SPP and HP SUM.
Problems Fixed:
This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset. When the drives are connected to a HP Smart Array E200 controller, the drive firmware must be updated to version HPD1 before the controller will detect the drives.
Type:
Firmware - SAS Storage Disk
Version:
HPD4(C)(24 Oct 2016)
Operating System(s):
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Description
This x64 Smart Component provides firmware for the following drive models: EG0900FDJYR and EG1200FDJYT
Enhancements
Enhancements/New Features:
Added support for Microsoft Windows Server 2016.
Installation Instructions
To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:
Reboot Requirement: Reboot may be required after installation for updates to take effect and hardware stability to be maintained.
Installation:
To update firmware from Windows operating system on target server:
Place the Smart Component in a temporary directory.
Double-click on the Smart Component.
Follow the directions given by the Smart Component.
Reboot your system if you would like the update to take effect immediately.
To use HP Smart Update Manager from the HPE Service Pack for ProLiant:
Place the desired firmware to be updated in the directory, <HPE SPP root folder>hpswpackages.
Run launch_hpsum.bat which is found in the root folder of the SPP.
Release Notes
End User License Agreements: HPE Software License Agreement v1 Hewlett-Packard End User License Agreement
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD4 do not need to update to HPD4 (C).
Notes:
Deliverable Name: Online ROM Flash Component for Windows (x64) - EG0900FDJYR and EG1200FDJYT Drives
Release Version and/or Date: HPD4 Last Recommended or Critical Version: HPD4
Previous Version of Firmware: HPD1 Firmware Dependency: None Enhancements/New Features:
Added support for Microsoft Windows Server 2016.
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
The component would fail to flash drive firmware on a server with a Trusted Platform Module (TPM) enabled when using the /tpmbypass switch.
Problems Fixed for HPD4 (C):
Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - “Device appears more than once in tree”. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.
Component would cause an exception error when deployed on a computer with a fully qualified domain name greater than 40 characters in length.
Known Issues: None
Fixes
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD4 do not need to update to HPD4 (C).
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
The component would fail to flash drive firmware on a server with a Trusted Platform Module (TPM) enabled when using the /tpmbypass switch.
Problems Fixed for HPD4 (C):
Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - “Device appears more than once in tree”. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.
Component would cause an exception error when deployed on a computer with a fully qualified domain name greater than 40 characters in length.
Revision History
Version:HPD4(C) (24 Oct 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD4 do not need to update to HPD4 (C).
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
The component would fail to flash drive firmware on a server with a Trusted Platform Module (TPM) enabled when using the /tpmbypass switch.
Problems Fixed for HPD4 (C):
Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - “Device appears more than once in tree”. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.
Component would cause an exception error when deployed on a computer with a fully qualified domain name greater than 40 characters in length.
Enhancements/New Features:
Added support for Microsoft Windows Server 2016.
Version:HPD4(B) (1 Apr 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HPE Smart Array controller running in Zero Memory (ZM) mode or an HPE ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD4 do not need to update to HPD4(B).
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Problems Fixed for HPD4 (B):
The component would fail to flash drive firmware on a server with a Trusted Platform Module (TPM) enabled when using the /tpmbypass switch.
Version:HPD4 (1 Apr 2016)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HP Smart Array controller running in Zero Memory (ZM) mode or an HP ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Problems Fixed:
Prevents the potential for incorrect data from being “read from” or “written to” the drive under extremely rare circumstances where the drive experiences consecutive error recoveries during a background scan and the Error Correction Code (ECC) fails. This issue has only been observed in a rigorous test environment and has NOT been reported in a customer production environment.
Version:HPD1(B) (30 Mar 2015)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HP Smart Array controller running in Zero Memory (ZM) mode or an HP ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the SPP and HP SUM.
Customers who already installed firmware version HPD1 do not need to update to HPD1 (B).
Problems Fixed:
This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset. When the drives are connected to a HP Smart Array E200 controller, the drive firmware must be updated to version HPD1 before the controller will detect the drives.
Enhancements/New Features:
Added support for UEFI (Universal Extensible Firmware Interface) based servers.
Enhancements/New Features for HPD1 (B):
Updated the flash engine to standardize logging across all SAS drive components.
Enhanced logging capability to improve the details provided in the component log file.
Version:HPD1 (9 Sep 2014)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Online firmware flashing of drives attached to an HP Smart Array controller running in Zero Memory (ZM) mode or an HP ProLiant host bus adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux and Microsoft Windows environments. All other OSes would require an offline update using the SPP and HP SUM.
Problems Fixed:
This firmware contains a change which causes the drive hardware to send one Identify frame instead of three for a link reset. When the drives are connected to a HP Smart Array E200 controller, the drive firmware must be updated to version HPD1 before the controller will detect the drives.
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.